Full fibre analysis
€6.00
Tax included
Full-staple measurement: 21 indicators, including mean micron, SD, CV, CEM, comfort factor, curvature, length and number of fibres, with the histogram and the along-staple micron profile (SD Along, SD Across). Correction factor calculated for your herd, Trim High ON by default. PDF report per animal with species-specific advice, herd summary, fineness class and detailed results on Fibre Herd.
☐ Expert option: Trim High OFF
For breeders who want every fibre counted, including guard hair above 80 µm, for example to track guard hair in a bloodline or to compare with an older OFF report. If unsure, keep the default (ON).
Product customization
Don't forget to save your customization to be able to add to cartNew at Fibre Lab & Co: description and advice included
Your report includes a plain-language description for each animal and for the whole herd, with advice on next steps. At no extra cost: the “Include the description and advice” box is ticked by default; you can untick it before adding to your cart.
What you get
- For each animal, 21 indicators: identification (animal, date of birth, sex, colour), mean diameter, standard deviation (SDD), coefficient of variation (CVD), coarse edge (CEM), comfort factor (CF, % of fibres ≤ 30 µm), share of fibres under 15 µm, spinning fineness, along-staple profile (Fine From Tip, MaxD, MinD, BaseD), variation along the staple (SD Along) and between fibres (SD Across), curvature and its standard deviation (SDC), staple length and number of fibres measured.
- The diameter histogram and the micron profile along the staple, from tip to skin, showing how nutrition, illness or pregnancy affected the growth year.
- The fineness class for the species (alpaca, llama, mohair, cashmere, sheep).
- One PDF report per animal with species-specific comments and advice, and a herd summary with comparisons and selection priorities, downloadable from your account. If you use Fibre Herd, results land on the animal's record, matched by its FLID (Fibre Herd Livestock ID, the animal's unique and permanent identifier on Fibre Herd, linking its samples and results to its record).
Our method
- Measured on OFDA 2000 in staple mode, in-house method derived from IWTO-47.
- Herd correction factor: samples are measured greasy. One sample from your herd is washed and measured again; the difference between greasy and clean fibre (grease, dust) gives the factor applied to the whole batch.
- Trim High ON by default: fibres coarser than 80 µm (very coarse guard hair) are left out, as they would distort the mean and SD of the usable fleece. You can choose the Trim High OFF option (see below).
- Daily instrument self-test and a reference staple with every batch. See our quality charter.
Reading your results
Look at SD before CV: the lower it is, the more uniform, soft and even the fleece. Compare animals year on year by always sampling the same spot. SD Across measures the variation between fibres, without the effect of season or feed along the staple (SD Along).
Taking the sample
- Mid-side: halfway between shoulder and hip, halfway down the body. Always the same side and spot.
- A small handful about two fingers wide, i.e. about 5 cm, cut close to the skin to capture the whole growth.
- In a paper envelope or bag (no sealed plastic), labelled with the animal's name and number.
- Fill in the information sheet (PDF) and send it with the samples.
Turnaround: 1 to 2 weeks after receipt, up to 1 month during shearing season.
Sample return: if you would like your samples back after analysis, tick "Return my samples after analysis (+€12 per order)" just before the Add to cart button. Only one return is charged per order, whatever the number of animals or analyses.
Which analysis?
| Simple | Full | Washed fibre | |
|---|---|---|---|
| Mean micron | yes | yes | yes |
| Species fineness class | yes | yes | yes |
| SD, CV, CEM, comfort factor, %<15 µm | - | yes | yes |
| Curvature and its SD, length, spinning fineness, number of fibres | - | yes | yes |
| Diameter histogram | - | yes | yes |
| Along-staple profile (Fine From Tip, MaxD, MinD, BaseD, SD Along, SD Across) | - | yes | yes |
| PDF report per animal and herd summary | - | yes | yes |
| Species-specific advice | - | yes | yes |
| Detailed results on Fibre Herd | - | yes | yes |
| Individual washing, no correction factor | - | - | yes |
| Trim High OFF available | - | option | OFF (all fibres) |
| Best for | sorting fleeces | selecting, monitoring, selling | maximum accuracy per animal |
See the simple analysis - See the washed fibre analysis
Need to compare several areas of the fleece? See the fleece uniformity analysis (3 points)
OFDA 2000 fibre test - Fibre Lab metrological control programme (charter v3.0)
Measurement on the OFDA 2000 in staple mode, using an in-house method derived from IWTO-47. Documented internal checks every test day and for every batch. Internal metrology control programme - in-house method derived from IWTO-47. Rigor rests on the procedure below.
How we stand behind the result
- Daily OFDA 2000 autotest on internal calibration fibres (10-100 µm). Outside manufacturer tolerance = no client testing.
- One batch reference staple (max deviation 0.3 µm on mean diameter).
- Weekly inter-series check on archive samples (same 0.3 µm threshold).
- Options always shown on the report: washing, correction factor, Trim High.
- If a check falls outside limits: testing stops until control is restored.
A result is only meaningful if the process is the same from one batch to the next. Our charter describes that process.
F-A
Comments (0)
No customer reviews for the moment.
5 other products in the same category:
Customers who bought this product also bought:
Full-staple measurement: 21 indicators, including mean micron, SD, CV, CEM, comfort factor, curvature, length and number of fibres, with the histogram and the along-staple micron profile (SD Along, SD Across). Correction factor calculated for your herd, Trim High ON by default. PDF report per animal with species-specific advice, herd summary, fineness class and detailed results on Fibre Herd.
☐ Expert option: Trim High OFF
For breeders who want every fibre counted, including guard hair above 80 µm, for example to track guard hair in a bloodline or to compare with an older OFF report. If unsure, keep the default (ON).