• New
Simple OFDA fibre analysis | Entry-level €4
search
  • Simple OFDA fibre analysis | Entry-level €4
  • Simple OFDA fibre analysis | Entry-level €4

Simple Fibre Test with correction factor

€4.00
Tax included

Fibre Test per animal with correction factor

Fill the information sheet (upload file below), send by email fibrelabandco@gmail.com and ship with samples to :

Fibre Lab and Co.

20 rue Jean Mermoz

59227 SAULZOIR

FRANCE

Quantity

Fibre Test will be done the week of reception to 1 month in peak time of Alpaca, Llama, Angora Goat, Cashmere, Angora Rabbit, Sheep, ...sample

Attention, the analysis result will only include the Average fibre diameter and will be sent by email.

Unique price

WHY ANALYSE YOUR FIBRE ?

The fiber analysis is an essential tool for you to monitor your breeding program.

It is an objective tool to monitor changes in the individual characteristics of your animal.

It is useful to recall that the tests are appropriate for your livestock.

Indeed the fibre varies enormously depending on:

• genetic characteristics

• Food and nutrient intake

• Health of Animals

When should I take the sample ?

2 possibilities :

you can take the sample during shearing

But, you can take the sample before shearing.

In this case, you are sure to take the sample in the right place and it lets you know your results before shearing, so you sort fleeces according to their fineness.

How much is needed for analysis ?

For each animal, take about a handful of fibre — roughly 5 cm across.

It may be interesting to take two samples. By this way, in case of problems or if you want to retest a fleece, you have a backup.

Where should I take my sample of fibre ?

alpaga zone de prélèvement

Be sure to collect the sample close to the skin.

Put each sample in an unsealed, unstapled envelope.

Clearly mark the animal’s name or number on the envelope.

WARNING : Samples must be dry. Moisture can cause significant results.

 

 

OFDA 2000 fibre test — Fibre Lab metrological control programme (charter v3.0)

Measurement on the OFDA 2000 in staple mode, according to the recognised optical method IWTO-47. Documented internal checks every test day and for every batch. Fibre Lab is not an ISO/IEC 17025 accredited laboratory and does not hold an IWTO licence: rigor rests on the procedure below, not on an external label.

How we stand behind the result

  • Daily OFDA 2000 autotest on internal calibration fibres (10–100 µm). Outside manufacturer tolerance = no client testing.
  • One batch reference staple (max deviation 0.3 µm on mean diameter).
  • Weekly inter-series check on archive samples (same 0.3 µm threshold).
  • Options always shown on the report: washing, correction factor, Trim High.
  • If a check falls outside limits: testing stops until control is restored.

A result is only meaningful if the process is the same from one batch to the next. Our charter describes that process.

See charter v3.0

F-AS
9999 Items
Comments (0)
No customer reviews for the moment.